This product identifies metal materials during the installation and construction ofpetrochemical refining, fine chemicals, pharmaceuticals, power stations, aerospace and other projects to ensure equipment acceptance and material acceptance. It is a metal identification tool in the waste metal recycling industry. It is widely used in field application scenarios such as quality control, material classification, alloy identification, safety prevention, accident investigation and so on, Alloy brandidentification and rapid analysis of metal composition solve the most basic raw material analysis problems in industrialization.
Detector | High performance Sipin detection components |
Excitation source | 45KV/200uA-silver target/tungsten target end window integrated micro X-ray tube and high voltage source |
Element detection range | 1.Elements with atomic numbers of 20-92 between calcium (mg) and uranium (U)2.Analysis of major elements out of alloy: Ti, V, Cr, Mn, Fe, Co, Ni, Cu, Zn, Zr, Nb, Mo, Ag, Cd, Sn, Sb, Ta, W, Pb, Bi, 20 in all (with continued addition allowed) |
Tested object | Solid |
Microcomputer display system | 1.Semi transparent and semi reflective industrial customizedtouch screen ≥ 5 inches resolution1080*720 |
Power supply | 1. Rechargeable lithium battery, standard at 6800mah, voltage: 7.2V; continuous work up to 12 hours;2.The instrument has the function of hot plug, delayed power off, no need to shut down when replacing the battery, and thebattery has its own power display; |
Charging mode | Universal adapter charging power supply; |
Collimatorsand filters | 1. Collimator of special radiation protection material, with inner diameter at 3mm;2.Without filters, switching time can be saved, and the background interference is deducted by software. |
Camera | Built-in with 5 million pixels high definition camera function capable of photo being taken for the tested items |
Data transmissionmode | Wifi, Bluetooth |
Operating ambient temperature andhumidity | Humidity ≤90%, 020℃-+60℃ |
Weight | ≤1.75KG (including batteries) |
Accessories | Standard configuration: 1. Three proof military protection box, with waterproof, dustproof and shock absorption functions 2. One set of test software, instrument end, PC end and collection end respectively 3. Rechargeable lithium battery * 24. Universal battery charging adapter * 1Optional accessories: base type test support, protective cover |
Security: | 1. The measured value at the side of the instrument is ≤0.2µSv/h (after deducting the background) Note: the supplier must provide a copy of the handheldX-ray analyzer (leakage ray) report issued by the national authorized legal metrology institution or the national test center in the response document2. Multiple safety protection, no test, no radiation;The radiation level during operation is far lower than the international safety standard, and has the functionof no sample air measurement and automatic shutdown of X-ray tube |